|
p1300006
I need to fit this, inside the cabin of my Pantera. It contains six pieces: The primary hoop, a drivers and passenger side support, front to rear support half way up on each side and a cross support at the top of the windshield. This is the test fit be
Date: 01/30/2010
Views: 826
|
|
P1300007
It has to fit inside here. Not a lot of room to work with and the cage is going to be tight to begin with.
Date: 01/30/2010
Views: 784
|
|
P1300008
It's IN! It took some muscling but I got it inside the car. Now I have to hammer it around a bit, tweak it some more and bolt it down. Then it all comes back out to get powder coated.
Date: 01/30/2010
Views: 755
|
|
P1300009
Passenger side fit.
Date: 01/30/2010
Views: 762
|
|
P1300010
So far, this is the only trouble spot I've found. I'm supposed to drill a hole to secure the hoop to the seat belt shoulder location. As you can see from this shot, the mounting plate doesn't quite reach down far enough on my car. I'll wait till I get
Date: 01/30/2010
Views: 786
|
|
P1300011
Looking toward the drivers side.
Date: 01/30/2010
Views: 809
|
|
P1300012
The rear view mirror will no longer work here. The sun visors are a very close fit but for the most part aren't going to work, so I've removed them.
Date: 01/30/2010
Views: 758
|
|
P1300013
I know it doesn't look like it, but there is plenty of room to open the glove compartment -and- open the fuse area.
Date: 01/30/2010
Views: 792
|
|
100_2302
Date: 02/09/2014
Views: 673
|
|
100_2303
Date: 02/09/2014
Views: 685
|